DSE 5120

*The Model 5120 is an Automatic Mains Failure Module which has been designed to allow the OEM to meet demand

for increased capability within the generator industry.

*The module has been primarily designed to monitor the incoming mains supply.

*Should the mains supply fall below a configurable limit, the generator will be automatically started and the load

transferred.

*When the AC mains supply returns to within limits, the module will then transfer back to the mains.

*The module indicates the operational status of the generator and monitors the engine parameters.

*Should a fault condition occur, the module will shut down the engine indicating any faults by means of a graphical LCD

display and a flashing LED on the front panel.

*selected operational timers and alarms can be adjusted by the customer.

*Micro-processor based design.Integral mains failure monitoring and load switching control.

*Automatic engine starting and stopping.

*Automatic shutdown on fault condition.

*Custom graphical icon display.

*Provides engine and generator instrumentation.

*Provides engine alarms and status information.

*Comprehensive list of timers and pre-configured sequences.

*Front panel and PC configurable inputs, outputs,alarms and timers.

*LED and LCD alarm indication.

*Compatible with 5200 series modules for easy upgrade path.

Power Supply	8 to 35 Vdc Continuous
Cranking dropouts:	Able to survive 0 V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V without the need for internal batteries.
Max Current	Operating 320mA at 12V, 215mA at 24V; Standby 175mA at 12V, 95mA at 24V
Start Relay Output:	16 Amp DC at supply voltage.
Fuel Relay Output:	16 Amp DC at supply voltage.
Auxiliary Relay Outputs:	5 Amp DC at supply voltage.
Charge Fail / Excitation Range	0 V to 35 V
alternator Input Range:	15V(ph-N) to 300V(ph-N) 3 Phase 4wire AC (+20%)
alternator Input Frequency:	50 - 60 Hz at rated engine speed (Minimum: 15V AC Ph-N)
Mains Supply Input Range:	15V(ph-N) to 300(ph-N) 3 Phase 4wire AC (+20%)
Mains Supply Input Frequency:	50 - 60 Hz at rated engine speed (Minimum: 15V AC Ph-N)
Magnetic Pick-up Voltage Input Range:	+/- 0.5 V to 70 V Peak
Magnetic Input Frequency:	10,000 Hz (max) at rated engine speed
Operating Temperature Range:	-30 to +70°C
Panel Cutout:	220mm x 160mm ( 8.7” x 6.3”